PSU Faculty Portal

Lecturer

9/2/2010 - 12/31/2013

Khaja Banda Nawaz College of Engineering

Gulbarga,India

Assistant Professor

7/21/2014 - 5/21/2016

Mangalore Institute of Technology and Engineering

Mangalore,India

Teaching Assistant

3/1/2017 - 12/31/2019

International Islamic University Malaysia

Kuala Lumpur,Malaysia

Abdul Aabid Aabid A. ,Md Abdul Raheman Raheman M.A. ,Meftah Hrairi Hrairi M. ,Muneer Baig Baig M.

Frattura ed Integrita Strutturale 2024-04-01

Improving the performance of damage repair in thin-walled structures with analytical data and machine learning algorithms

Abdul Aabid Aabid A. ,Muneer Baig Baig M. ,Meftah Hrairi Hrairi M. ,Jaffar Syed Mohamed Ali Mohamed Ali J.S.

Frattura ed Integrita Strutturale 2024-04-01

Effect of fiber orientation-based composite lamina on mitigation of stress intensity factor for a repaired plate: a finite element study

Shaheer Ahmed Khan Khan S.A. ,Zakaria Mohd Zain Zain Z.M. ,Ziauddin Siddiqui Siddiqui Z. ,Wajahat Khan Khan W. ,Abdul Aabid Aabid A. ,Muneer Baig Baig M. ,Mohammad Abdul Malik Malik M.A.

PLoS ONE 2024-01-01

Development of Magnesium Aluminate (MgAl2O4) Nanoparticles for refractory crucible application

Abdul Aabid Aabid A. ,Meftah Hrairi Hrairi M. ,Jaffar Syed Mohamed Ali Mohamed Ali J.S.

Frattura ed Integrita Strutturale 2024-01-01

Optimization of damage repair with piezoelectric actuators using the Taguchi method

Omar Shabbir Ahmed Ahmed O.S. ,Abdul Aabid Aabid A. ,Jaffar Syed Mohamed Ali Ali J.S.M. ,Meftah Hrairi Hrairi M. ,Norfazrina Mohd Yatim Yatim N.M.

Journal of Advanced Research in Applied Mechanics 2023-09-01

Buckling Analysis of a Thin-Walled C-Section Channel under Mechanical and Thermal Load

Abdul Aabid Aabid A. ,Muneer Baig Baig M.

Materials 2023-09-01

Sustainable Materials for Engineering Applications

Omar Shabbir Ahmed Ahmed O.S. ,Abdul Aabid Aabid A. ,Jaffar Syed Mohamed Ali Mohamed Ali J.S. ,Meftah Hrairi Hrairi M. ,Norfazrina Mohd Yatim Yatim N.M.

ACS Omega 2023-08-29

Progresses and Challenges of Composite Laminates in Thin-Walled Structures: A Systematic Review

Bisma Parveez Parveez B. ,Nur Ayuni Jamal Jamal N.A. ,Md Abdul Maleque Maleque M.A. ,Ahmad Zahirani Ahmad Azhar Ahmad Azhar A.Z. ,Hafizah Hanim Mohd Zaki Mohd Zaki H.H. ,Abdul Aabid Aabid A. ,Muneer Baig Baig M.

Journal of Materials Research and Technology 2023-07-01

Improvement in effectiveness of diamond in strengthening the porous aluminium composite

Abdul Aabid Aabid A.

Materials 2023-06-01

Optimization of Reinforcing Patch Effects on Cracked Plates Using Analytical Modeling and Taguchi Design

Syed Fouzan Iftekar Iftekar S.F. ,Abdul Aabid Aabid A. ,Adibah Amir Amir A. ,Muneer Baig Baig M.

Polymers 2023-06-01

Advancements and Limitations in 3D Printing Materials and Technologies: A Critical Review

Bisma Parveez Parveez B. ,Nur Ayuni Jamal Jamal N.A. ,Abdul Aabid Aabid A. ,Muneer Baig Baig M.

Materials 2023-04-01

Microstructure and Strengthening Effect of Coated Diamond Particles on the Porous Aluminum Composites

Krishnasamy Karthik Karthik K. ,Devaraj Rajamani Rajamani D. ,Elumalai Perumal Venkatesan Venkatesan E.P. ,Mohamed Iqbal Shajahan Shajahan M.I. ,Ali A. Rajhi Rajhi A.A. ,Abdul Aabid Aabid A. ,Muneer Baig Baig M. ,Bahaa Saleh Saleh B.

Crystals 2023-03-01

Experimental Investigation of the Mechanical Properties of Carbon/Basalt/SiC Nanoparticle/Polyester Hybrid Composite Materials

Kuluthupalayam Maruthavanan Eazhil Eazhil K.M. ,Ranganathan Sudhakaran Sudhakaran R. ,Elumalai Perumal Venkatesan Venkatesan E.P. ,Abdul Aabid Aabid A. ,Muneer Baig Baig M.

Metals 2023-02-01

Prediction of Angular Distortion in Gas Metal Arc Welding of Structural Steel Plates Using Artificial Neural Networks

Abdul Aabid Aabid A. ,Yasser E. Ibrahim Ibrahim Y.E. ,Meftah Hrairi Hrairi M. ,Jaffar Syed Mohamed Ali Ali J.S.M.

Materials 2023-02-01

Optimization of Structural Damage Repair with Single and Double-Sided Composite Patches through the Finite Element Analysis and Taguchi Method

Bisma Parveez Parveez B. ,Nur Ayuni Jamal Jamal N.A. ,Md Abdul Maleque Maleque M.A. ,Alya Naili Rozhan Rozhan A.N. ,Abdul Aabid Aabid A. ,Muneer Baig Baig M.

Materials 2023-02-01

Optimizing the Compressive Properties of Porous Aluminum Composites by Varying Diamond Content, Space Holder Size and Content

Abdul Aabid Aabid A. ,Meftah Hrairi Hrairi M. ,Syed Jaffar Mohamed Ali Ali S.J.M. ,Yasser E. Ibrahim Ibrahim Y.E.

ACS Omega 2023-01-24

Review of Piezoelectric Actuator Applications in Damaged Structures: Challenges and Opportunities

Nur Diana Zainal Abedin Abedin N.D.Z. ,Jaffar Syed Mohamed Ali Ali J.S.M. ,Abdul Aabid Aabid A. ,Yulfian Aminanda Aminanda Y.

AIP Conference Proceedings 2023-01-10

Study on the Lateral Torsional Buckling of Composite Thin-Walled Beam

Asraar Anjum Anjum A. ,Abdul Aabid Aabid A. ,Meftah Hrairi Hrairi M.

Frattura ed Integrita Strutturale 2023-01-01

Analysis of damage control of thin plate with piezoelectric actuators using finite element and machine learning approach

Jaimon Dennis Quadros Quadros J.D. ,Sher Afghan Khan Khan S.A. ,Abdul Aabid Aabid A. ,Muneer Baig Baig M.

CMES - Computer Modeling in Engineering and Sciences 2023-01-01

Modeling and Validation of Base Pressure for Aerodynamic Vehicles Based on Machine Learning Models

Turki Al-Khalifah Al-Khalifah T. ,Abdul Aabid Aabid A. ,Sher Afghan Khan Khan S.A. ,Muhammad Hanafi Bin Azami Bin Azami M.H. ,Muneer Baig Baig M.

Australian Journal of Mechanical Engineering 2023-01-01

Response surface analysis of nozzle parameters at supersonic flow through microjets

Ridwan Ridwan ,Sher Afghan Khan Khan S.A. ,Jaffar Syed Mohamed Ali Ali J.S.M. ,Mohd. Azan Mohammed Sapardi Sapardi M.A.M. ,Abdul Aabid Aabid A.

Fluid Dynamics and Materials Processing 2023-01-01

Numerical Analysis of Cavity-Based Control of Base Pressure Variations at Supersonic Mach Numbers

Abdul Aabid Aabid A. ,Muneer Baig Baig M. ,Meftah Hrairi Hrairi M.

Materials 2023-01-01

Advanced Composite Materials for Structural Maintenance, Repair, and Control

Bisma Parveez Parveez B. ,Nur Ayuni Jamal Jamal N.A. ,Abdul Aabid Aabid A. ,Muneer Baig Baig M. ,Farazila Yusof Yusof F.

Materials 2023-01-01

Experimental Analysis and Parametric Optimization on Compressive Properties of Diamond-Reinforced Porous Al Composites

Jalal Mohammed Zayan Mohammed Zayan J. ,Abdul Khaliq Rasheed Rasheed A.K. ,Akbar John John A. ,Waleed Fekry Faris Faris W.F. ,Abdul Aabid Aabid A. ,Muneer Baig Baig M. ,Batoul Alallam Alallam B.

Materials 2023-01-01

Synthesis and Characterization of Novel Ternary-Hybrid Nanoparticles as Thermal Additives

Nur Husnina Muhamad Zuraidi Zuraidi N.H.M. ,Sher Afghan Khan Khan S.A. ,Abdul Aabid Aabid A. ,Muneer Baig Baig M. ,Istiyaq Mudassir Shaiq Shaiq I.M.

Fluid Dynamics and Materials Processing 2023-01-01

Passive Control of Base Pressure in a Converging-Diverging Nozzle with Area Ratio 2.56 at Mach 1.8

Elumalai Perumal Venkatesan Venkatesan E.P. ,Parthasarathy Murugesan Murugesan P. ,Sivakumar Ellappan Ellappan S. ,Silambarasan Rajendran Rajendran S. ,Abdul Aabid Aabid A. ,Mohamed Abbas Abbas M. ,Chanduveetil Ahamed Saleel Saleel C.A. ,Prade

ACS Omega 2022-12-20

Effect of Kariba Weed Biodiesel Blended with n-Pentane on the Chosen Parameters of a Ceramic-Coated Thermal Barrier Direct Injection Diesel Engine

Sivaraman Kanithan Kanithan S. ,Natarajan Arun Vignesh Vignesh N.A. ,Siva Baskar Baskar S. ,Santhosh Nagaraja Nagaraja S. ,Mohamed Abbas Abbas M. ,Abdul Aabid Aabid A. ,Muneer Baig Baig M.

Materials 2022-11-01

Structural Morphology and Optical Properties of Strontium-Doped Cobalt Aluminate Nanoparticles Synthesized by the Combustion Method

Jaimon Dennis Quadros Quadros J.D. ,Chetna Nagpal Nagpal C. ,Sher Afghan Khan Khan S.A. ,Abdul Aabid Aabid A. ,Muneer Baig Baig M.

PLoS ONE 2022-10-01

Investigation of suddenly expanded flows at subsonic Mach numbers using an artificial neural networks approach

Mohamad Norfaieqwan Bin Kamarudin Bin Kamarudin M.N. ,Jaffar Syed Mohamed Ali Mohamed Ali J.S. ,Abdul Aabid Aabid A. ,Yasser E. Ibrahim Ibrahim Y.E.

Aerospace 2022-10-01

Buckling Analysis of a Thin-Walled Structure Using Finite Element Method and Design of Experiments

Narendran Jagadeesan Jagadeesan N. ,Anthoniraj Selvaraj Selvaraj A. ,Santhosh Nagaraja Nagaraja S. ,Mohamed Abbas Abbas M. ,C. Ahamed Saleel Saleel C.A. ,Abdul Aabid Aabid A. ,Muneer Baig Baig M.

Materials 2022-10-01

Response Surface Methodology Based Optimization of Test Parameter in Glass Fiber Reinforced Polyamide 66 for Dry Sliding, Tribological Performance

Bisma Parveez Parveez B. ,Nur Ayuni Jamal Jamal N.A. ,Hazleen Anuar Anuar H. ,Yusilawati Ahmad Ahmad Y. ,Abdul Aabid Aabid A. ,Muneer Baig Baig M.

Materials 2022-08-01

Microstructure and Mechanical Properties of Metal Foams Fabricated via Melt Foaming and Powder Metallurgy Technique: A Review

Krishnamoorthy Ramalingam Ramalingam K. ,Elumalai Perumal Venkatesan Venkatesan E.P. ,Abdul Aabid Aabid A. ,Muneer Baig Baig M.

Sustainability (Switzerland) 2022-05-01

Assessment of CI Engine Performance and Exhaust Air Quality Outfitted with Real-Time Emulsion Fuel Injection System

Abdul Aabid Aabid A. ,Meftah Hrairi Hrairi M. ,Jaffar Syed Mohamed Ali Ali J.S.M. ,Tamer Ali Sebaey Sebaey T.A.

Materials 2022-05-01

A Review on Reductions in the Stress-Intensity Factor of Cracked Plates Using Bonded Composite Patches

Daniel C. Ribu Ribu D.C. , Rajesh Rajesh R. , Thirumalaikumarasamy Thirumalaikumarasamy D. ,Chidambaram Seshadri Ramachandran Ramachandran C.S. ,C. Ahamed Saleel Saleel C.A. ,Abdul Aabid Aabid A. ,Muneer Baig Baig M. , Saleh Saleh B.

Coatings 2022-04-01

Investigating the Water Jet Erosion Performance of HVOF-Sprayed WC-10Co Coatings on 35CrMo Steel Utilizing Design of Experiments

Kashish Kumar Kumar K. ,Alok Singh Singh A. ,Saboor Shaik Shaik S. ,C. Ahamed Saleel Saleel C.A. ,Abdul Aabid Aabid A. ,Muneer Baig Baig M.

Sustainability (Switzerland) 2022-03-01

Comparative Analysis on Dehumidification Performance of KCOOH–LiCl Hybrid Liquid Desiccant Air-Conditioning System: An Energy-Saving Approach

Abdul Aabid Aabid A. ,Muhammad Amir Mirza Bin Mohd Zakuan Zakuan M.A.M.B.M. ,Sher Afghan Khan Khan S.A. ,Yasser E. Ibrahim Ibrahim Y.E.

Aerospace Systems 2022-03-01

Structural analysis of three-dimensional wings using finite element method

Ridwan Ridwan ,Muhammad Ammar Rusydi Rosnin Rosnin M.A.R. ,Abdul Aabid Aabid A. ,Sher Afghan Khan Khan S.A. ,Jaffar Syed Mohamed Ali Ali J.S.M. ,Mohd. Azan Mohammed Sapardi Sapardi M.A.M.

Journal of Advanced Research in Fluid Mechanics and Thermal Sciences 2022-01-01

Effect of Expansion Level and Relief to Shear Layer in a Suddenly Expanded Flow: A CFD Approach

Jaimon D. Quadros Quadros J.D. , Suhas Suhas P. ,Sher A. Khan Khan S.A. ,Abdul Aabid Aabid A. ,Muneer Baig Baig M. ,Yakub I. Mogul Mogul Y.I.

Technical Sciences 2022-01-01

Fuzzy-based prediction for suddenly expanded axisymmetric nozzle flows with microjets

Shilpa Shilpa M.K. ,Md Abdul Raheman Raheman M.A. ,Abdul Aabid Aabid A. ,Muneer Baig Baig M. , Veeresha Veeresha R.K. ,Nagesh Kudva Kudva N.

Fluid Dynamics and Materials Processing 2022-01-01

A Systematic Review of Thermoelectric Peltier Devices: Applications and Limitations

Abdul Aabid Aabid A. ,Sher Afghan Khan Khan S.A. ,Muneer Baig Baig M.

Fluid Dynamics and Materials Processing 2022-01-01

Numerical Analysis of a Microjet-Based Method for Active Flow Control in Convergent-Divergent Nozzles with a Sudden Expansion Duct

Jalal Mohammed Zayan Zayan J.M. ,Abdul Khaliq Rasheed Rasheed A.K. ,Akbar John John A. ,Mohammad Khalid Khalid M. ,Ahmad Faris Ismail Ismail A.F. ,Abdul Aabid Aabid A. ,Muneer Baig Baig M.

Materials 2022-01-01

Investigation on rheological properties of water-based novel ternary hybrid nanofluids using experimental and taguchi method

Abdul Aabid Aabid A. ,Mohammed Ali Murtuza Murtuza M.A. ,Sher Afghan Khan Khan S.A. ,Muneer Baig Baig M.

Journal of Materials Research and Technology 2022-01-01

Optimization of dry sliding wear behavior of aluminium-based hybrid MMC's using experimental and DOE methods

Abdul Aabid Aabid A. ,Sher Afghan Khan Khan S.A. ,Asif Afzal Afzal A. ,Muneer Baig Baig M.

Meccanica 2022-01-01

Investigation of tiny jet locations effect in a sudden expansion duct for high-speed flows control using experimental and optimization methods

Tikendra Nath Verma Verma T.N. ,Upendra Rajak Rajak U. ,Abhishek Dasore Dasore A. ,Asif Afzal Afzal A. ,A. Muthu Manokar Manokar A.M. ,Abdul Aabid Aabid A. ,Muneer Baig Baig M.

Scientific Reports 2021-12-01

Experimental and empirical investigation of a CI engine fuelled with blends of diesel and roselle biodiesel

Jaffar Syed Mohamed Ali Ali J.S.M. ,Wan Muhammad Hafizuddin W. Embong Embong W.M.H.W. ,Abdul Aabid Aabid A.

CFD Letters 2021-11-01

Effect of Cut-Out Shape on the Stresses in Aircraft Wing Ribs under Aerodynamic Load

Jaimon Dennis Quadros Quadros J.D. ,Sher Afghan Khan Khan S.A. ,Abdul Aabid Aabid A. ,Mohammad Shohag Alam Alam M.S. ,Muneer Baig Baig M.

Aerospace 2021-11-01

Machine learning applications in modelling and analysis of base pressure in suddenly expanded flows

Abdul Aabid Aabid A. ,Sher Afghan Khan Khan S.A. ,Muneer Baig Baig M.

Applied Sciences (Switzerland) 2021-08-01

A critical review of supersonic flow control for high-speed applications

Abdul Aabid Aabid A. ,Md Abdul Raheman Raheman M.A. ,Yasser E. Ibrahim Ibrahim Y.E. ,Asraar Anjum Anjum A. ,Meftah Hrairi Hrairi M. ,Bisma Parveez Parveez B. ,Nagma Parveen Parveen N. ,Jalal Mohammed Zayan Mohammed Zayan J.

Sensors 2021-06-02

A systematic review of piezoelectric materials and energy harvesters for industrial applications

Ballupete Nagaraju Sharath Sharath B.N. ,Channarayapattana Venkataramaiah Venkatesh Venkatesh C.V. ,Asif Afzal Afzal A. ,Navid Aslfattahi Aslfattahi N. ,Abdul Aabid Aabid A. ,Muneer Baig Baig M. ,Bahaa Saleh Saleh B.

Materials 2021-06-01

Multi ceramic particles inclusion in the aluminium matrix and wear characterization through experimental and response surface-artificial neural networks

Abdul Aabid Aabid A. ,Bisma Parveez Parveez B. ,Md Abdul Raheman Raheman M.A. ,Yasser E. Ibrahim Ibrahim Y.E. ,Asraar Anjum Anjum A. ,Meftah Hrairi Hrairi M. ,Nagma Parveen Parveen N. ,Jalal Mohammed Zayan Mohammed Zayan J.

Actuators 2021-05-01

Review a review of piezoelectric material-based structural control and health monitoring techniques for engineering structures: Challenges and opportunities

Tanner David Harpool Harpool T.D. ,Ibrahim Mohammed Alarifi Alarifi I.M. ,Basheer A. Alshammari Alshammari B.A. ,Abdul Aabid Aabid A. ,Muneer Baig Baig M. ,Rizwan Ahmed Malik Malik R.A. ,Ahmed Mohamed Sayed Sayed A.M. ,Ramazan Asmatulu Asmat

Materials 2021-05-01

Evaluation of the infill design on the tensile response of 3d printed polylactic acid polymer

Abdul Aabid Aabid A. ,Sher Afghan Khan Khan S.A.

Arabian Journal for Science and Engineering 2021-03-01

Investigation of High-Speed Flow Control from CD Nozzle Using Design of Experiments and CFD Methods

Abdul Aabid Aabid A. ,Sher Afghan Khan Khan S.A.

International Journal of Heat and Technology 2021-02-01

Studies on flows development in a suddenly expanded circular duct at supersonic mach numbers

Sher Afghan Khan Khan S.A. ,Omar Mohamed Ibrahim Ibrahim O.M. ,Abdul Aabid Aabid A.

Proceedings 2021-01-01

CFD analysis of compressible flows in a convergent-divergent nozzle

Abdul Aabid Aabid A. ,Liyana Nabilah Binti Khairulaman Khairulaman L.N.B. ,Sher Afghan Khan Khan S.A.

Advances in Aircraft and Spacecraft Science 2021-01-01

Analysis of Flows and Prediction of CH10 Airfoil for Unmanned Arial Vehicle Wing Design

Thanikodi Sathish Sathish T. ,Abdul Razak R. Kaladgi Kaladgi A.R.R. , Mohanavel Mohanavel V. , Arul Arul K. ,Asif Afzal Afzal A. ,Abdul Aabid Aabid A. ,Muneer Baig Baig M. ,Bahaa Saleh Saleh B.

Materials 2021-01-01

Experimental investigation of the friction stir weldability of aa8006 with zirconia particle reinforcement and optimized process parameters

Abdul Aabid Aabid A. ,Sher Afghan Khan Khan S.A. ,Turki Al-Khalifah Al-Khalifah T. ,Bisma Parveez Parveez B. ,Asraar Anjum Anjum A.

Smart Innovation, Systems and Technologies 2021-01-01

Parametric Analysis of Adhesively Bonded Single Lap Joint Using Finite Element Method

Abdul Aabid Aabid A. ,Meftah Hrairi Hrairi M. ,Ahmed Abuzaid Abuzaid A. ,Jaffar Syed Mohamed Ali Mohamed Ali J.S.

Thin-Walled Structures 2021-01-01

Estimation of stress intensity factor reduction for a center-cracked plate integrated with piezoelectric actuator and composite patch

Asif Afzal Afzal A. ,Abdul Aabid Aabid A. ,Ambareen Khan Khan A. ,Sher Afghan Khan Afghan Khan S. ,Upendra Rajak Rajak U. ,Tikendra Nath Verma Nath Verma T. ,Rahul Kumar Kumar R.

Aerospace Science and Technology 2020-12-01

Response surface analysis, clustering, and random forest regression of pressure in suddenly expanded high-speed aerodynamic flows

Hamza Afser Delvi Delvi H.A. ,Mohammed Faheem Faheem M. ,Abdul Aabid Aabid A. , Math Math M.C. ,Sher Afghan Khan Khan S.A.

Journal of Advanced Research in Fluid Mechanics and Thermal Sciences 2020-02-01

Investigation of characteristics of spark ignition engine fuelled with ethanol-gasoline blends using iso-octane additive

Azmil Afifi Afifi A. ,Abdul Aabid Aabid A. ,Sher Afghan Khan Afghan Khan S.

Proceedings 2020-01-01

Numerical investigation of splitter plate effect on bluff body using finite volume method

Abdul Aabid Aabid A. ,Sher Afghan Khan Afghan Khan S.

Proceedings 2020-01-01

Determination of wall pressure flows at supersonic Mach numbers

Abdul Aabid Aabid A. ,Meftah Hrairi Hrairi M. ,Jaffar Syed Mohamed Ali Mohamed Ali J.S.

Proceedings 2020-01-01

Optimization of composite patch repair for center-cracked rectangular plate using design of experiments method

Abdul Aabid Aabid A. ,Ahmed G.M. Fharukh Fharukh A.G.M. ,Sher Afghan Khan Khan S.A.

ICETAS 2019 - 2019 6th IEEE International Conference on Engineering, Technologies and Applied Sciences 2019-12-01

Experimental Investigation of Wall Pressure Distribution in a Suddenly Expanded Duct from a Convergent-Divergent Nozzle

Abdul Aabid Aabid A. ,Zakir Ilahi Chaudhary Chaudhary Z.I. ,Sher Afghan Khan Khan S.A.

Journal of Advanced Research in Fluid Mechanics and Thermal Sciences 2019-11-01

Modelling and analysis of convergent divergent nozzle with sudden expansion duct using finite element method

Liyana Kharulaman Kharulaman L. ,Abdul Aabid Aabid A. ,Fharukh Ahmed Ghasi Mehaboobali Mehaboobali F.A.G. ,Sher Afghan Khan Khan S.A.

International Journal of Engineering and Advanced Technology 2019-10-01

Research onflows for NACA 2412 airfoil using computational fluid dynamics method

Muhammad Amir Mirza Bin Mohd Zakuan Zakuan M.A.M.B.M. ,Abdul Aabid Aabid A. ,Sher Afghan Khan Khan S.A.

International Journal of Engineering and Advanced Technology 2019-10-01

Modelling and structural analysis of three-dimensional wing

Khan Khan S.A. ,Zaheer Ahmed Ahmed Z. ,Abdul Aabid Aabid A. ,Imran Mokashi Mokashi I.

International Journal of Recent Technology and Engineering 2019-08-01

Experimental research on flow development and control effectiveness in the duct at high speed

Khan Khan S.A. ,Abdul Aabid Aabid A. ,Imran Mokashi Mokashi I. ,Zaheer Ahmed Ahmed Z.

International Journal of Recent Technology and Engineering 2019-08-01

Effect of micro jet control on the flow filed of the duct at mach 1.5

Mohammed Faheem Faheem M. ,Mohammed Kareemullah Kareemullah M. ,Abdul Aabid Aabid A. ,Imran Mokashi Mokashi I. , Khan Khan S.A.

International Journal of Recent Technology and Engineering 2019-08-01

Experiment on of nozzle flow with sudden expansion at mach 1.1

Mohammad Nishat Akhtar Akhtar M.N. ,Elmi Abu Bakar Bakar E.A. ,Abdul Aabid Aabid A. ,Sher Afghan Khan Khan S.A.

International Journal of Innovative Technology and Exploring Engineering 2019-07-01

Numerical simulations of a CD nozzle and the influence of the duct length

Mohammad Nishat Akhtar Akhtar M.N. ,Elmi Abu Bakar Bakar E.A. ,Abdul Aabid Aabid A. ,Sher Afghan Khan Khan S.A.

International Journal of Innovative Technology and Exploring Engineering 2019-07-01

Effects of micro jets on the flow field of the duct with sudden expansion

Mohammad Nishat Akhtar Akhtar M.N. ,Elmi Abu Bakar Bakar E.A. ,Abdul Aabid Aabid A. ,Sher Afghan Khan Khan S.A.

International Journal of Innovative Technology and Exploring Engineering 2019-07-01

Control of CD nozzle flow using microjets at mach 2.1

Muhammed Hanafi Azami Azami M.H. ,Mohammed Faheem Faheem M. ,Abdul Aabid Aabid A. ,Imran Mokashi Mokashi I. , Khan Khan S.A.

International Journal of Recent Technology and Engineering 2019-07-01

Inspection of supersonic flows in a CD nozzle using experimental method

Muhammed Hanafi Azami Azami M.H. ,Mohammed Faheem Faheem M. ,Abdul Aabid Aabid A. ,Imran Mokashi Mokashi I. , Khan Khan S.A.

International Journal of Recent Technology and Engineering 2019-07-01

Experimental research of wall pressure distribution and effect of micro jet at Mach 1.5

Khan Khan S.A. ,Imran Mokashi Mokashi I. ,Abdul Aabid Aabid A. ,Mohammed Faheem Faheem M.

International Journal of Recent Technology and Engineering 2019-07-01

Experimental research on wall pressure distribution in C-D nozzle at mach number 1.1 for area ratio 3.24

Khan Khan S.A. ,Abdul Aabid Aabid A. ,Zakir Ilahi Chaudhary Chaudhary Z.I.

International Journal of Innovative Technology and Exploring Engineering 2019-04-01

Influence of control mechanism on the flow field of duct at mach 1.2 for area ratio 2.56

Abdul Aabid Aabid A. ,Meftah Hrairi Hrairi M. , Shaik Dawood Shaik Dawood M.S.I.

International Journal of Recent Technology and Engineering 2019-03-01

Modeling different repair configurations of an aluminum plate with a hole

Abdul Aabid Aabid A. , Jyothi Jyothi ,Jalal Mohammed Zayan Zayan J.M. ,Sher Afghan Khan Khan S.A.

Advances in Materials Research (South Korea) 2019-01-01

Experimental and numerical investigation on gas turbine blade with the application of thermal barrier coatings

Abdul Aabid Aabid A. ,Meftah Hrairi Hrairi M. ,Jaffar Syed Mohamed Ali Ali J.S.M. ,Ahmed Abuzaid Abuzaid A.

IIUM Engineering Journal 2019-01-01

Effect of bonded composite patch on the stress intensity factor for a centercracked plate

Abdul Aabid Aabid A. ,Azmil Afifi Afifi A. ,Fharukh Ahmed Ghasi Mehaboob Ali Mehaboob Ali F.A.G. ,Mohammad Nishat Akhtar Akhtar M.N. ,Sher Afghan Khan Khan S.A.

CFD Letters 2019-01-01

Cfd analysis of splitter plate on bluff body

Muhammad Fahmi Mohd Sajali Sajali M.F.M. ,Syed Ashfaq Ashfaq S. ,Abdul Aabid Aabid A. ,Sher Afghan Khan Khan S.A.

Journal of Advanced Research in Fluid Mechanics and Thermal Sciences 2019-01-01

Simulation of effect of various distances between front and rear body on drag of a non-circular cylinder

Sher Afghan Khan Khan S.A. ,Abdul Aabid Aabid A. ,Imran Mokashi Mokashi I. ,Abdulrahman Abdullah Al-Robaian Al-Robaian A.A. ,Ali Sulaiman Alsagri Alsagri A.S.

CFD Letters 2019-01-01

Optimization of two-dimensional wedge flow field at supersonic mach number

Sher Afghan Khan Khan S.A. ,Abdul Aabid Aabid A. ,Fharukh Ahmed Mehaboobali Ghasi Ghasi F.A.M. ,Abdulrahman Abdullah Al-Robaian Al-Robaian A.A. ,Ali Sulaiman Alsagri Alsagri A.S.

CFD Letters 2019-01-01

Analysis of area ratio in a CD nozzle with suddenly expanded duct using CFD method

Muhammad Fahmi Mohd Sajali Sajali M.F.M. ,Abdul Aabid Aabid A. ,Sher Afghan Khan Khan S.A. ,Fharukh Ahmed Ghasi Mehaboobali Mehaboobali F.A.G. ,Erwin Sulaeman Sulaeman E.

CFD Letters 2019-01-01

Numerical investigation of flow field of a non-circular cylinder

Sher Afghan Khan Khan S.A. ,Abdul Aabid Aabid A. ,C. Ahamed Saleel Saleel C.A.

International Journal of Mechanical and Mechatronics Engineering 2019-01-01

Influence of micro jets on the flow development in the enlarged duct at supersonic Mach number

Sher Afghan Khan Khan S.A. ,Abdul Aabid Aabid A. ,C. Ahamed Saleel Saleel C.A.

International Journal of Mechanical and Mechatronics Engineering 2019-01-01

CFD simulation with analytical and theoretical validation of different flow parameters for the wedge at supersonic Mach number

Abdul Aabid Aabid A. ,Ambareen Khan Khan A. ,Nurul Musfirah. Mazlan Mazlan N.M. ,Mohd Azmi. Ismail Ismail M.A. ,Mohammad Nishat Akhtar Akhtar M.N. , Khan Khan S.A.

International Journal of Engineering and Advanced Technology 2019-01-01

Numerical simulation of suddenly expanded flow at mach 2.2

Sher Afghan Khan Khan S.A. ,Abdul Aabid Aabid A. ,Maughal Ahmed Ali Baig Baig M.A.A.

International Journal of Mechanical and Production Engineering Research and Development 2018-08-31

Design and fabrication of unmanned arial vehicle for multi-mission tasks

Sher Afghan Khan Khan S.A. ,Abdul Aabid Aabid A. ,Maughal Ahmed Ali Baig Baig M.A.A.

International Journal of Mechanical and Production Engineering Research and Development 2018-06-30

CFD analysis of cd nozzle and effect of nozzle pressure ratio on pressure and velocity for suddenly expanded flows

Abdul Aabid Aabid A. , Khan Khan S.A.

Materials Science and Engineering 2018-06-01

Optimization of Heat Transfer on Thermal Barrier Coated Gas Turbine Blade

Abdul Aabid Aabid A. , Khan Khan S.A.

Materials Science and Engineering 2018-06-01

Design and Fabrication of Flying Saucer Utilizing Coanda Effect

Ambareen Khan Khan A. ,Abdul Aabid Aabid A. , Khan Khan S.A.

International Journal of Engineering and Technology(UAE) 2018-01-01

CFD analysis of convergent-divergent nozzle flow and base pressure control using micro-JETS

Fharukh Ahmed Fharukh Ahmed G.M. ,Abdulrehman A. Alrobaian Alrobaian A.A. ,Abdul Aabid Aabid A. , Khan Khan S.A.

International Journal of Mechanical and Production Engineering Research and Development 2018-01-01

Numerical analysis of convergent-divergent nozzle using finite element method

Abdul Aabid Aabid A. ,Meftah Hrairi Hrairi M. ,Jaffar Syed Mohammed Ali Mohammed Ali J.S. ,Ahmed Abuzaid Abuzaid A.

International Journal of Mechanical and Production Engineering Research and Development 2018-01-01

Stress concentration analysis of a composite patch on a hole in an isotropic plate

Abdul Aabid Aabid A. ,Meftah Hrairi Hrairi M. ,Jaffar Syed Mohammed Ali Ali J.S.M. ,Ahmed Abuzaid Abuzaid A.

International Journal of Mechanical and Production Engineering Research and Development 2018-01-01

Numerical analysis of cracks emanating from hole in plate repaired by composite patch