PSU Faculty Portal

Assistant Professor

8/27/2019 - 3/9/2021

Prince Sultan University

Riyadh,Saudi Arabia

Associate Professor

8/1/2023 - 5/1/2025

Prince Sultan University

Riyadh,Saudi Arabia

Raja Muhammad Waseem Ullah Khan Khan R.M.W.U. ,Furqan Ahmad Ahmad F. ,Hassan Mehboob Mehboob H. ,Yasir Nawab Nawab Y. ,Muzzamal Hussain Hussain M. ,Seung Hwan Chang Chang S.H.

Fibers and Polymers 2025-03-01

Investigation of Mechanical Properties of Recycled Textile Waste Bio-Epoxy Composites for the Replacement of Traditional Materials Used in Structural Applications

Abdulla All Noman Noman A.A. ,Mohd Shamil Shaari Shaari M.S. ,Hassan Mehboob Mehboob H. ,Abdul Hadi Azman Azman A.H.

Results in Engineering 2025-03-01

Recent advancements in additively manufactured hip implant design using topology optimization technique

Shivi Tripathi Tripathi S. ,Madhusmita Dash Dash M. ,Ruchira Chakraborty Chakraborty R. ,Harri Junaedi Lukman Lukman H.J. ,Prasoon Kumar Kumar P. ,Shabir Hassan Hassan S. ,Hassan Mehboob Mehboob H. ,Harpreet Singh Singh H. ,Himansu Sekhar Na

Biomaterials Science 2024-10-23

Engineering considerations in the design of tissue specific bioink for 3D bioprinting applications

Ali Mehboob Mehboob A. ,Hassan Mehboob Mehboob H. ,Abdelhak Ouldyerou Ouldyerou A. ,Imad Barsoum Barsoum I.

Materials and Design 2024-04-01

Computational biomechanical analysis of Ti-6Al-4V porous bone plates for lower limb fractures

Hassan Mehboob Mehboob H. ,Abdelhak Ouldyerou Ouldyerou A. ,Ali Mehboob Mehboob A. ,Imad Barsoum Barsoum I.

ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE) 2024-01-01

FINITE ELEMENT ANALYSIS OF TAPER AND STRAIGHT POROUS DENTAL IMPLANTS

Ali Mehboob Mehboob A. ,Imad Barsoum Barsoum I. ,Hassan Mehboob Mehboob H. ,Rashid K. Abu Al-Rub Abu Al-Rub R.K. ,Abdelhak Ouldyerou Ouldyerou A.

Virtual and Physical Prototyping 2024-01-01

Topology optimization and biomechanical evaluation of bone plates for tibial bone fractures considering bone healing

Abdelhak Ouldyerou Ouldyerou A. ,Hassan Mehboob Mehboob H. ,Ali Mehboob Mehboob A. ,Ali Merdji Merdji A. ,Laid Aminallah Aminallah L. ,Osama M. Mukdadi Mukdadi O.M. ,Imad Barsoum Barsoum I. ,Harri Junaedi Junaedi H.

PLoS ONE 2023-12-01

Biomechanical performance of resin composite on dental tissue restoration: A finite element analysis

Hassan Mehboob Mehboob H. ,Abdelhak Ouldyerou Ouldyerou A. ,Muhammad Farzik Ijaz Ijaz M.F.

Applied Sciences (Switzerland) 2023-06-01

Biomechanical Investigation of Patient-Specific Porous Dental Implants: A Finite Element Study

Khaled Akkad Akkad K. ,Hassan Mehboob Mehboob H. ,Rakan Alyamani Alyamani R. ,Faris Tarlochan Tarlochan F.

Journal of Functional Biomaterials 2023-03-01

A Machine-Learning-Based Approach for Predicting Mechanical Performance of Semi-Porous Hip Stems

Abdelhak Ouldyerou Ouldyerou A. ,Ali Merdji Merdji A. ,Laid Aminallah Aminallah L. ,Hassan Mehboob Mehboob H. ,Ali Mehboob Mehboob A. ,Sandipan Roy Roy S. ,Tarun Goswami Goswami T. ,Osama M. Mukdadi Mukdadi O.M. ,Faris Tarlochan Tarlochan F

Composites Communications 2023-02-01

Functionally graded ceramics (FGC) dental abutment with implant-supported cantilever crown: Finite element analysis

Furqan Ahmad Ahmad F. ,Fethi Abbassi Abbassi F. ,Hassan Mehboob Mehboob H. ,Farooq Ahmed Ahmed F. ,Sajjad Miran Miran S.

ICCM International Conferences on Composite Materials 2023-01-01

Behavior of Paperboard with Interacting Circular Holes Under Tensile Loading Using Three-Dimensional Digital Image Correlation

Waseem Arif Arif W. ,Tahir Abbas Jauhar Jauhar T.A. ,Sajjad Miran Miran S. ,Furqan Ahmad Ahmad F. ,Farooq Ahmed Ahmed F. ,Himansh Kumar Kumar H. ,Hassan Mehboob Mehboob H. ,Ashish Saxena Saxena A.

Journal of Process Mechanical Engineering 2023-01-01

Evaluation of dissimilar TIG welded joints of novel high strength low alloy steel for automotive applications: Experiment and numerical comparative approach

Ali Mehboob Mehboob A. ,Hassan Mehboob Mehboob H.

Engineering Materials 2023-01-01

Bioinspired Polymer Composite Implants

Hassan Mehboob Mehboob H.

Composite Structures 2023-01-01

Biomechanical performance evaluation of composite metamaterial implant with 3D printing approach for lumbar interbody fusion surgery: A finite element study

Abdelhak Ouldyerou Ouldyerou A. ,Laid Aminallah Aminallah L. ,Ali Merdji Merdji A. ,Ali Mehboob Mehboob A. ,Hassan Mehboob Mehboob H.

Mechanics of Advanced Materials and Structures 2023-01-01

Finite element analyses of porous dental implant designs based on 3D printing concept to evaluate biomechanical behaviors of healthy and osteoporotic bones

Mohamed Toumi Nasri Nasri M.T. ,Fethi Abbassi Abbassi F. ,Furqan Ahmad Ahmad F. ,Wardi Makhloufi Makhloufi W. ,Mahfoudh Ayadi Ayadi M. ,Hassan Mehboob Mehboob H. ,Heung Soap Choi Choi H.S.

Mechanics of Advanced Materials and Structures 2023-01-01

Experimental and numerical investigation of sheet metal failure based on Johnson-Cook model and Erichsen test over a wide range of temperatures

Abdelhak Ouldyerou Ouldyerou A. ,Hassan Mehboob Mehboob H. ,Ali Merdji Merdji A. ,Laid Aminallah Aminallah L. ,Ali Mehboob Mehboob A. ,Osama M. Mukdadi Mukdadi O.M.

Computers in Biology and Medicine 2022-11-01

Biomechanical analysis of printable functionally graded material (FGM) dental implants for different bone densities

Abdelhak Ouldyerou Ouldyerou A. ,Ali Merdji Merdji A. ,Laid Aminallah Aminallah L. ,Sandipan Roy Roy S. ,Hassan Mehboob Mehboob H. ,Mutlu Özcan Ozcan M.

Journal of the Mechanical Behavior of Biomedical Materials 2022-10-01

Biomechanical performance of Ti-PEEK dental implants in bone: An in-silico analysis

Ali Mehboob Mehboob A. ,Hassan Mehboob Mehboob H. ,Yasir Nawab Nawab Y. ,Seung Hwan Chang Hwan Chang S.

Materials and Design 2022-09-01

Three-dimensional printable metamaterial intramedullary nails with tunable strain for the treatment of long bone fractures

Hassan Mehboob Mehboob H. ,Ali Mehboob Mehboob A. ,Fethi Abbassi Abbassi F. ,Furqan Ahmad Ahmad F. ,Seung-Hwan Chang Chang S.-H.

Composite Structures 2022-06-01

Finite element analysis of biodegradable Ti/polyglycolic acid composite bone plates based on 3D printing concept

Khalid Ansari Ansari K. ,Shantanu Khandeshwar Khandeshwar S. ,Charuta Waghmare Waghmare C. ,Hassan Mehboob Mehboob H. ,Tripti Gupta Gupta T. ,Avinash N. Shrikhande Shrikhande A.N. ,Mohamed Abbas Abbas M.

Materials 2022-05-01

Experimental Evaluation of Industrial Mushroom Waste Substrate Using Hybrid Mechanism of Vermicomposting and Effective Microorganisms

Naser Fawzi Al Zoubi Zoubi N.F.A. ,Faris Tarlochan Tarlochan F. ,Hassan Mehboob Mehboob H.

Applied Sciences (Switzerland) 2022-05-01

Mechanical and Fatigue Behavior of Cellular Structure Ti-6Al-4V Alloy Femoral Stems: A Finite Element Analysis

Muhammad Usama Zaheer Zaheer M.U. ,Hassan Mehboob Mehboob H. ,Ali Mehboob Mehboob A. ,Seung-Hwan Chang Chang S.-H.

Engineering 2022-03-15

Evaluation of the effect of bone plate modulus on the early bone healing of fractured tibia

Naser Fawzi Al Zoubi Zoubi N.F.A. ,Faris Tarlochan Tarlochan F. ,Hassan Mehboob Mehboob H. ,Firas Jarrar Jarrar F.

Applied Sciences (Switzerland) 2022-02-01

Design of Titanium Alloy Femoral Stem Cellular Structure for Stress Shielding and Stem Stability: Computational Analysis

Thokchom Subhaschandra Singh Singh T.S. ,Upendra Rajak Rajak U. ,Tikendra Nath Verma Verma T.N. ,Prerana Nashine Nashine P. ,Hassan Mehboob Mehboob H. ,A. Muthu Manokar Manokar A.M. ,Asif Afzal Afzal A.

Case Studies in Thermal Engineering 2022-01-01

Exhaust emission characteristics study of light and heavy-duty diesel vehicles in India

Hassan Mehboob Mehboob H. ,Ali Mehboob Mehboob A. ,Fethi Abbassi Abbassi F. ,Furqan Ahmad Ahmad F. ,Abdul Samad Khan Khan A.S. ,Sajjad Miran Miran S.

Mechanics of Advanced Materials and Structures 2022-01-01

Bioinspired porous dental implants using the concept of 3D printing to investigate the effect of implant type and porosity on patient's bone condition

Furqan Ahmad Ahmad F. ,Hassan Mehboob Mehboob H. ,Fethi Abbassi Abbassi F. ,Jung-Wuk Hong Hong J.-W. ,Jihed Zghal Zghal J. ,Ali Mehboob Mehboob A.

Mechanics of Advanced Materials and Structures 2022-01-01

Numerical investigation to evaluate the energy effect on the impact resistance of an aircraft carbon fiber-reinforced polymer composite

Elumalai Elumalai P.V. , Parthasarathy Parthasarathy M. ,Joshua Stephen Chellakumar Isaac JoshuaRamesh Lalvani Lalvani J.S.C.I.J. ,Hassan Mehboob Mehboob H. ,Olusegun David Samuel Samuel O.D. ,Christopher C. Enweremadu Enweremadu C.C. ,C. Aham

Energy Reports 2021-11-01

Effect of injection timing in reducing the harmful pollutants emitted from CI engine using N-butanol antioxidant blended eco-friendly Mahua biodiesel

Muhammad Umar Aslam Khan Khan M.U.A. ,Saiful Izwan Abd Razaq Abd Razaq S.I. ,Hassan Mehboob Mehboob H. ,Sarish Rehman Rehman S. ,Wafa Shamsan Al-Arjan Al-Arjan W.S. ,Rashid Amin Amin R.

Polymers 2021-11-01

Antibacterial and hemocompatible phresponsive hydrogel for skin wound healing application: In vitro drug release

Muhammad Umar Aslam Khan Aslam Khan M.U. ,Mohsin Ali Raza Raza M.A. ,Hassan Mehboob Mehboob H. ,Mohammed Rafiq Abdul Kadir Abdul Kadir M.R. ,Saiful Izwan Abd Razak Abd Razak S.I. ,Saqlain A. Shah Shah S.A. ,Muhammad Zahir Iqbal Iqbal M.Z. ,Ras

RSC Advances 2021-05-14

Erratum: Development and: In vitro evaluation of κ-carrageenan based polymeric hybrid nanocomposite scaffolds for bone tissue engineering (RSC Adv. (2020) 10 (40529-40542) DOI: 10.1039/D0RA07446B)

Muhammad Umar Aslam Khan Aslam Khan M.U. ,Wafa Shamsan Al-Arjan Al-Arjan W.S. ,Mona Saad Binkadem Binkadem M.S. ,Hassan Mehboob Mehboob H. ,Adnan Haider Haider A. ,Mohsin Ali Raza Raza M.A. ,Saiful Izwan Abd Razak Abd Razak S.I. ,Anwarul Hasa

Nanomaterials 2021-05-01

Development of biopolymeric hybrid scaffold-based on aac/go/nhap/tio2 nanocomposite for bone tissue engineering: In-vitro analysis

Muhammad Umar Aslam Khan Khan M.U.A. ,Saiful Izwan Abd Razak Abd Razak S.I. ,Hassan Mehboob Mehboob H. ,Mohammed Rafiq Abdul Kadir Abdul Kadir M.R. ,T. Joseph Sahaya Anand Anand T.J.S. ,Fawad Inam Inam F. ,Saqlain A. Shah Shah S.A. ,Mahmoud E.

ACS Omega 2021-02-16

Synthesis and Characterization of Silver-Coated Polymeric Scaffolds for Bone Tissue Engineering: Antibacterial and in Vitro Evaluation of Cytotoxicity and Biocompatibility

Muhammad Umar Aslam Khan Khan M.U.A. ,Saiful Izwan Abd Razak Razak S.I.A. ,Wafa Shamsan Al Arjan Arjan W.S.A. ,Samina Nazir Nazir S. , Joseph Sahaya Anand Joseph Sahaya Anand T. ,Hassan Mehboob Mehboob H. ,Rashid Amin Amin R.

Molecules 2021-02-01

Recent advances in biopolymeric composite materials for tissue engineering and regenerative medicines: A review

Muhammad Umar Aslam Khan Aslam Khan M.U. ,Saiful Izwan Abd Razak Abd Razak S.I. ,Wafa Shamsan Al Arjan Al Arjan W.S. ,Samina Nazir Nazir S. ,T Joseph Sahaya Anand Sahaya Anand T.J. ,Hassan Mehboob Mehboob H. ,Rashid Amin Amin R.

Molecules (Basel, Switzerland) 2021-01-25

Recent Advances in Biopolymeric Composite Materials for Tissue Engineering and Regenerative Medicines: A Review

Tamer A. Sebaey Sebaey T.A. ,Dipen Kumar Rajak Kumar Rajak D. ,Hassan Mehboob Mehboob H.

Composite Structures 2021-01-01

Internally stiffened foam-filled carbon fiber reinforced composite tubes under impact loading for energy absorption applications

Hassan Mehboob Mehboob H. ,Furqan Ahmad Ahmad F. ,Faris Tarlochan Tarlochan F. ,Ali Mehboob Mehboob A. ,Seung Hwan Chang Chang S.H.

Biomechanics and Modeling in Mechanobiology 2020-12-01

A comprehensive analysis of bio-inspired design of femoral stem on primary and secondary stabilities using mechanoregulatory algorithm

Muhammad Umar Aslam Khan Aslam Khan M.U. ,Mohsin Ali Raza Raza M.A. ,Hassan Mehboob Mehboob H. ,Mohammed Rafiq Abdul Kadir Abdul Kadir M.R. ,Saiful Izwan Abd Razak Abd Razak S.I. ,Saqlain A. Shah Shah S.A. ,Muhammad Zahir Iqbal Iqbal M.Z. ,Ras

RSC Advances 2020-11-01

Development and: In vitro evaluation of κ-carrageenan based polymeric hybrid nanocomposite scaffolds for bone tissue engineering

Ali Mehboob Mehboob A. ,Syed Hasan Askari Rizvi Rizvi S.H.A. ,Seung-Hwan Chang Chang S.-H. ,Hassan Mehboob Mehboob H.

Composites Science and Technology 2020-09-08

Comparative study of healing fractured tibia assembled with various composite bone plates

Hassan Mehboob Mehboob H. ,Faris Tarlochan Tarlochan F. ,Ali Mehboob Mehboob A. ,Seung-Hwan Chang Chang S.-H. , Ramesh Ramesh S. ,Wan Sharuzi Wan Harun Harun W.S.W. ,Kumaran Kadirgama Kadirgama K.

Materials in Medicine 2020-09-01

A novel design, analysis and 3D printing of Ti-6Al-4V alloy bio-inspired porous femoral stem

Ali Mehboob Mehboob A. ,Hassan Mehboob Mehboob H. ,Seung-Hwan Chang Chang S.-H.

Applied Science and Manufacturing 2020-08-01

Evaluation of unidirectional BGF/PLA and Mg/PLA biodegradable composites bone plates-scaffolds assembly for critical segmental fractures healing

Ali Raza Raza A. ,Hassan Mehboob Mehboob H. ,Sajjad Miran Miran S. ,Waseem Arif Arif W. ,Syed Farukh Javaid Rizvi Rizvi S.F.J.

Energies 2020-07-01

Investigation on the characteristics of biodiesel droplets in the engine cylinder

Muhammad Umar Aslam Khan Khan M.U.A. ,Hassan Mehboob Mehboob H. ,Saiful Izwan Abd Razak Abd Razak S.I.A. ,Mohd Yazid Yahya Yahya M.Y. ,Abdul Halim Mohd Yusof Yusof A.H.M. ,Muhammad Hanif Ramlee Ramlee M.H. ,T. Joseph Sahaya Anand Anand T.J.S.

Polymers 2020-06-01

Development of polymeric nanocomposite (xyloglucan-co-methacrylic acid/hydroxyapatite/SiO2) scaffold for bone tissue engineering applications-in-vitro antibacterial, cytotoxicity and cell culture evaluation

Hassan Mehboob Mehboob H. ,Faris Tarlochan Tarlochan F. ,Sami Alkhatib Alkhatib S. ,Ali Mehboob Mehboob A. ,Seung Hwan Chang Chang S.H.

Solids, Structures and Coupled Problems, ECCM 2018 and 7th European Conference on Computational Fluid Dynamics, ECFD 2018 2020-01-01

Finite element analysis of pores design and tissue differentiation in cementless hip prosthesis: (ECCM -ECFD 2018 conference)

Sami Emad Alkhatib Alkhatib S.E. ,Hassan Mehboob Mehboob H. ,Faris Tarlochan Tarlochan F.

Journal of Bionic Engineering 2019-11-01

Finite Element Analysis of Porous Titanium Alloy Hip Stem to Evaluate the Biomechanical Performance During Walking and Stair Climbing

Sami E. Alkhatib Alkhatib S.E. ,Faris Tarlochan Tarlochan F. ,Hassan Mehboob Mehboob H. ,Ramesh Singh Singh R. ,Kumaran Kadirgama Kadirgama K. ,Wan Sharuzi Bin Wan Harun Harun W.S.B.W.

Artificial Organs 2019-07-01

Finite element study of functionally graded porous femoral stems incorporating body-centered cubic structure

Faris Tarlochan Tarlochan F. ,Sami Al-Khatib Al-Khatib S. ,Hassan Mehboob Mehboob H.

2019 IEEE 10th International Conference on Mechanical and Intelligent Manufacturing Technologies, ICMIMT 2019 2019-05-09

Functionally graded porous femoral stem: Computational Analysis

Faris Tarlochan Tarlochan F. ,Hassan Mehboob Mehboob H. ,Ali Mehboob Mehboob A. ,Seung-Hwan Chang Chang S.-H.

Composite Structures 2018-11-15

Biomechanical design of a composite femoral prosthesis to investigate the effects of stiffness, coating length, and interference press fit

Hassan Mehboob Mehboob H. ,Faris Tarlochan Tarlochan F. ,Ali Mehboob Mehboob A. ,Seung-Hwan Chang Chang S.-H.

Materials and Design 2018-07-05

Finite element modelling and characterization of 3D cellular microstructures for the design of a cementless biomimetic porous hip stem

Kadirgama Kadirgama K. , Harun Harun W.S.W. , Tarlochan Tarlochan F. , Samykano Samykano M. , Ramasamy Ramasamy D. ,Mohd Zaidi Azir Azir M.Z. , Mehboob Mehboob H.

International Journal of Advanced Manufacturing Technology 2018-07-01

Statistical and optimize of lattice structures with selective laser melting (SLM) of Ti6AL4V material

Faris Tarlochan Tarlochan F. ,Hassan Mehboob Mehboob H. ,Ali Mehboob Mehboob A. ,Seung-Hwan Chang Chang S.-H.

Biomechanics and Modeling in Mechanobiology 2018-06-01

Influence of functionally graded pores on bone ingrowth in cementless hip prosthesis: a finite element study using mechano-regulatory algorithm

Ali Mehboob Mehboob A. ,Hassan Mehboob Mehboob H. ,Jinha Kim Kim J. ,Seung-Hwan Chang Chang S.-H. ,Faris Tarlochan Tarlochan F.

Composite Structures 2017-09-01

Influence of initial biomechanical environment provided by fibrous composite intramedullary nails on bone fracture healing

Ali Mehboob Mehboob A. ,Hassan Mehboob Mehboob H. ,Seung-Hwan Chang Chang S.-H. ,Faris Tarlochan Tarlochan F.

Composite Structures 2017-05-01

Effect of composite intramedullary nails (IM) on healing of long bone fractures by means of reamed and unreamed methods

Faris Tarlochan Tarlochan F. ,Hassan Mehboob Mehboob H.

ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE) 2017-01-01

A need for functionally graded stiffness femoral stem for reduction in stress shielding and promoting bone growth: Computational analysis

Hassan Mehboob Mehboob H. ,Jinha Kim Kim J. ,Ali Mehboob Mehboob A. ,Seung-Hwan Chang Chang S.-H.

Composite Structures 2017-01-01

How post-operative rehabilitation exercises influence the healing process of radial bone shaft fractures fixed by a composite bone plate

Hassan Mehboob Mehboob H. ,Ji-Hun Bae Bae J.-H. ,Min-Gu Han Han M.-G. ,Seung-Hwan Chang Chang S.-H.

Composite Structures 2016-05-20

Effect of air plasma treatment on mechanical properties of bioactive composites for medical application: Composite preparation and characterization

Hassan Mehboob Mehboob H. ,Seung-Hwan Chang Chang S.-H.

Composite Structures 2015-01-01

Effect of structural stiffness of composite bone plate-scaffold assembly on tibial fracture with large fracture gap

Hassan Mehboob Mehboob H. ,Seung-Hwan Chang Chang S.-H.

Composite Structures 2015-01-01

Optimal design of a functionally graded biodegradable composite bone plate by using the Taguchi method and finite element analysis

Hassan Mehboob Mehboob H. ,Muhammad Awais Awais M. ,Hamad Khalid Khalid H. ,Aqif Anwar Ch Ch A.A. ,Saadat Anwar Siddiqi Siddiqi S.A. ,Ihtesham Rehman Rehman I.

Biomedical Engineering - Applications, Basis and Communications 2014-12-25

Polymer-assisted deposition of hydroxyapatite coatings using electrophoretic technique

Hassan Mehboob Mehboob H. ,Seung-Hwan Chang Chang S.-H.

Composite Structures 2014-01-01

Application of composites to orthopedic prostheses for effective bone healing: A review

Hassan Mehboob Mehboob H. ,Seung-Hwan Chang Chang S.-H.

Composite Structures 2014-01-01

Evaluation of the development of tissue phenotypes: Bone fracture healing using functionally graded material composite bone plates

Hassan Mehboob Mehboob H. ,Seung-Hwan Chang Chang S.-H.

Composite Structures 2014-01-01

Evaluation of healing performance of biodegradable composite bone plates for a simulated fractured tibia model by finite element analysis

Dae-Sung Son Son D.-S. ,Hassan Mehboob Mehboob H. ,Seung-Hwan Chang Chang S.-H.

Engineering 2014-01-01

Simulation of the bone healing process of fractured long bones applied with a composite bone plate with consideration of the blood vessel growth

Dae-Sung Son Son D.-S. ,Hassan Mehboob Mehboob H. ,Ho-Joong Jung Jung H.-J. ,Seung-Hwan Chang Chang S.-H.

Engineering 2014-01-01

The finite element analysis for endochondral ossification process of a fractured tibia applied with a composite IM-rod based on a mechano-regulation theory using a deviatoric strain

Hassan Mehboob Mehboob H. ,Dae-Sung Son Son D.-S. ,Seung-Hwan Chang Chang S.-H.

Composites Science and Technology 2013-05-07

Finite element analysis of tissue differentiation process of a tibia with various fracture configurations when a composite intramedullary rod was applied

Hassan Mehboob Mehboob H. ,Park Myung Kyun Kyun P.M. ,An-Soo Kang Kang A.S. ,Behzad Ahmed Zai Zai B.A. ,Rashid Ali Ali R.

24th International Battery, Hybrid and Fuel Cell Electric Vehicle Symposium and Exhibition 2009, EVS 24 2009-12-01

Analysis of the clamping pressure effect in PEM fuel cell structure by FEM and experiment

Myung Kyun Park Park M.K. ,Rashid Ali Sindhu Sindhu R.A. ,Soo Jin Lee Lee S.J. ,Behzad Ahmed Zai Zai B.A. ,Hassan Mehboob Mehboob H.

International Journal of Precision Engineering and Manufacturing 2009-12-01

A residual stress evaluation in laser welded lap joint with hole drilling method

Behzad Ahmed Zai Zai B.A. , Park Park M.K. , Choi Choi H.S. ,Hassan Mehboob Mehboob H. ,Rashid Ali Ali R.

Journal of Mechanical Science and Technology 2009-11-01

Effect of moisture absorption on damping and dynamic stiffness of carbon fiber/epoxy composites

Hassan Mehboob Mehboob H. ,Park Myung Kyun Kyun P.M. ,Kang An-Soo An-Soo K. ,Behzad Ahmed Zai Zai B.A. ,Rashid Ali Ali R.

EFC 2009 - Piero Lunghi Conference, Proceedings of the 3rd European Fuel Cell Technology and Applications Conference 2009-01-01

Analysis of the clamping pressure effect in PEM fuel cell structure by fem and experiment