PSU Faculty Portal

Research Scientist

12/25/2009 - 12/25/2009

Creative System Design LLC

Baltimore,United States of America

Assistant Professor

2/13/2010 - 7/13/2017

King Saud University

Riyadh,Saudi Arabia

Assistant Professor

9/17/2017 - 6/15/2019

Prince Sultan University

Riyadh,Saudi Arabia

Associate Professor

6/16/2019 - 3/15/2021

Prince Sultan University

Riyadh,Saudi Arabia

Muneer Baig Baig M. ,Bandar Almeshari Almeshari B. ,Abdul Aabid Aabid A. ,Harri Junaedi Junaedi H. ,Abdulhakim Almajid Almajid A.

Heliyon 2024-05-15

The effect of maleic anhydride grafted polypropylene addition on the degradation in the mechanical properties of the PP/wood composites

Ambareen Khan Khan A. ,Sher Afghan Khan Khan S.A. ,Vijayanandh Raja Raja V. ,Abdul Aabid Aabid A. ,Muneer Baig Baig M.

Heliyon 2024-05-15

Effect of ribs in a suddenly expanded flow at sonic Mach number

Abdul Aabid Aabid A. ,Md Abdul Raheman Raheman M.A. ,Meftah Hrairi Hrairi M. ,Muneer Baig Baig M.

Frattura ed Integrita Strutturale 2024-04-01

Improving the performance of damage repair in thin-walled structures with analytical data and machine learning algorithms

Abdul Aabid Aabid A. ,Muneer Baig Baig M. ,Meftah Hrairi Hrairi M. ,Jaffar Syed Mohamed Ali Mohamed Ali J.S.

Frattura ed Integrita Strutturale 2024-04-01

Effect of fiber orientation-based composite lamina on mitigation of stress intensity factor for a repaired plate: a finite element study

Shamitha Shetty Shetty S. ,Asha Crasta Crasta A. ,Sher Afghan Khan Khan S.A. ,Abdul Aabid Aabid A. ,Muneer Baig Baig M.

Fluid Dynamics and Materials Processing 2024-01-01

Effect of Sweptback Angle of a Delta Wing on Surface Pressure Distribution at Supersonic Mach Numbers

Ambareen Khan Khan A. ,Sher Afghan Khan Khan S.A. ,Mohammed Nishat Akhtar Akhtar M.N. ,Abdul Aabid Aabid A. ,Muneer Baig Baig M.

Fluid Dynamics and Materials Processing 2024-01-01

Base Pressure Control with Semi-Circular Ribs at Critical Mach Number

Bisma Parveez Parveez B. ,Nur Ayuni Jamal Jamal N.A. ,Nur Izzah Nazurah Nazurah N.I. ,Abdul Aabid Aabid A. ,Muneer Baig Baig M.

ACS Omega 2024-01-01

Effects of Diamond Content on the Morphology and Compressive Properties of Porous Aluminum Composites

Vigneshvaran Sethuraman Sethuraman V. ,Parvathy Rajendran Rajendran P. ,Sher Afghan Khan Khan S.A. ,Abdul Aabid Aabid A. ,Muneer Baig Baig M.

Fluid Dynamics and Materials Processing 2024-01-01

Control of Nozzle Flow Using Rectangular Ribs at Sonic and Supersonic Mach Numbers

Bisma Parveez Parveez B. ,Mohd Supian Abu Bakar Abu Bakar M.S. ,Abdul Aabid Aabid A. ,Muneer Baig Baig M.

Polymer-Plastics Technology and Materials 2024-01-01

A comprehensive review of PLA-blended biocomposites and their application in biomedical and food packagings

Shaheer Ahmed Khan Khan S.A. ,Zakaria Mohd Zain Zain Z.M. ,Ziauddin Siddiqui Siddiqui Z. ,Wajahat Khan Khan W. ,Abdul Aabid Aabid A. ,Muneer Baig Baig M. ,Mohammad Abdul Malik Malik M.A.

PLoS ONE 2024-01-01

Development of Magnesium Aluminate (MgAl2O4) Nanoparticles for refractory crucible application

Abdul Aabid Aabid A. ,Muneer Baig Baig M.

Materials 2023-09-01

Sustainable Materials for Engineering Applications

Bisma Parveez Parveez B. ,Nur Ayuni Jamal Jamal N.A. ,Md Abdul Maleque Maleque M.A. ,Ahmad Zahirani Ahmad Azhar Ahmad Azhar A.Z. ,Hafizah Hanim Mohd Zaki Mohd Zaki H.H. ,Abdul Aabid Aabid A. ,Muneer Baig Baig M.

Journal of Materials Research and Technology 2023-07-01

Improvement in effectiveness of diamond in strengthening the porous aluminium composite

Syed Fouzan Iftekar Iftekar S.F. ,Abdul Aabid Aabid A. ,Adibah Amir Amir A. ,Muneer Baig Baig M.

Polymers 2023-06-01

Advancements and Limitations in 3D Printing Materials and Technologies: A Critical Review

Bandar Almeshari Almeshari B. ,Harri Junaedi Junaedi H. ,Muneer Baig Baig M. ,Abdulhakim Almajid Almajid A.

Journal of Materials Research and Technology 2023-05-01

Development of 3D printing short carbon fiber reinforced polypropylene composite filaments

Bisma Parveez Parveez B. ,Nur Ayuni Jamal Jamal N.A. ,Abdul Aabid Aabid A. ,Muneer Baig Baig M.

Materials 2023-04-01

Microstructure and Strengthening Effect of Coated Diamond Particles on the Porous Aluminum Composites

Krishnasamy Karthik Karthik K. ,Devaraj Rajamani Rajamani D. ,Elumalai Perumal Venkatesan Venkatesan E.P. ,Mohamed Iqbal Shajahan Shajahan M.I. ,Ali A. Rajhi Rajhi A.A. ,Abdul Aabid Aabid A. ,Muneer Baig Baig M. ,Bahaa Saleh Saleh B.

Crystals 2023-03-01

Experimental Investigation of the Mechanical Properties of Carbon/Basalt/SiC Nanoparticle/Polyester Hybrid Composite Materials

Kuluthupalayam Maruthavanan Eazhil Eazhil K.M. ,Ranganathan Sudhakaran Sudhakaran R. ,Elumalai Perumal Venkatesan Venkatesan E.P. ,Abdul Aabid Aabid A. ,Muneer Baig Baig M.

Metals 2023-02-01

Prediction of Angular Distortion in Gas Metal Arc Welding of Structural Steel Plates Using Artificial Neural Networks

Bisma Parveez Parveez B. ,Nur Ayuni Jamal Jamal N.A. ,Md Abdul Maleque Maleque M.A. ,Alya Naili Rozhan Rozhan A.N. ,Abdul Aabid Aabid A. ,Muneer Baig Baig M.

Materials 2023-02-01

Optimizing the Compressive Properties of Porous Aluminum Composites by Varying Diamond Content, Space Holder Size and Content

Jaimon D. Quadros Quadros J.D. ,Sher Afghan Khan Khan S.A. ,Ma Mohin Mohin M. ,Yakub I. Mogul Mogul Y.I. ,Abdul Aabid Aabid A. ,Muneer Baig Baig M. ,Omar Shabbir Ahmed Ahmed O.S.

ACS Omega 2023-01-01

Heat Transfer of Ca (NO3)2-KNO3 Molten Salt Mixtures for Austempering and Martempering Processes of Steels

Jaimon Dennis Quadros Quadros J.D. ,Sher Afghan Khan Khan S.A. ,Abdul Aabid Aabid A. ,Muneer Baig Baig M.

CMES - Computer Modeling in Engineering and Sciences 2023-01-01

Modeling and Validation of Base Pressure for Aerodynamic Vehicles Based on Machine Learning Models

Aysha Shabana Shabana A. ,Asha Crasta Crasta A. ,Sher Afghan Khan Khan S.A. ,Abdul Aabid Aabid A. ,Muneer Baig Baig M.

Fluid Dynamics and Materials Processing 2023-01-01

Computation of Stiffness and Damping Derivatives of an Ogive in a Limiting Case of Mach Number and Specific Heat Ratio

Turki Al-Khalifah Al-Khalifah T. ,Abdul Aabid Aabid A. ,Sher Afghan Khan Khan S.A. ,Muhammad Hanafi Bin Azami Bin Azami M.H. ,Muneer Baig Baig M.

Australian Journal of Mechanical Engineering 2023-01-01

Response surface analysis of nozzle parameters at supersonic flow through microjets

Abdul Aabid Aabid A. ,Muneer Baig Baig M. ,Meftah Hrairi Hrairi M.

Materials 2023-01-01

Advanced Composite Materials for Structural Maintenance, Repair, and Control

Bisma Parveez Parveez B. ,Nur Ayuni Jamal Jamal N.A. ,Abdul Aabid Aabid A. ,Muneer Baig Baig M. ,Farazila Yusof Yusof F.

Materials 2023-01-01

Experimental Analysis and Parametric Optimization on Compressive Properties of Diamond-Reinforced Porous Al Composites

Jalal Mohammed Zayan Mohammed Zayan J. ,Abdul Khaliq Rasheed Rasheed A.K. ,Akbar John John A. ,Waleed Fekry Faris Faris W.F. ,Abdul Aabid Aabid A. ,Muneer Baig Baig M. ,Batoul Alallam Alallam B.

Materials 2023-01-01

Synthesis and Characterization of Novel Ternary-Hybrid Nanoparticles as Thermal Additives

Nur Husnina Muhamad Zuraidi Zuraidi N.H.M. ,Sher Afghan Khan Khan S.A. ,Abdul Aabid Aabid A. ,Muneer Baig Baig M. ,Istiyaq Mudassir Shaiq Shaiq I.M.

Fluid Dynamics and Materials Processing 2023-01-01

Passive Control of Base Pressure in a Converging-Diverging Nozzle with Area Ratio 2.56 at Mach 1.8

Sivaraman Kanithan Kanithan S. ,Natarajan Arun Vignesh Vignesh N.A. ,Siva Baskar Baskar S. ,Santhosh Nagaraja Nagaraja S. ,Mohamed Abbas Abbas M. ,Abdul Aabid Aabid A. ,Muneer Baig Baig M.

Materials 2022-11-01

Structural Morphology and Optical Properties of Strontium-Doped Cobalt Aluminate Nanoparticles Synthesized by the Combustion Method

Harri Junaedi Junaedi H. ,Muneer Baig Baig M. ,Abdulsattar Dawood Dawood A. ,Essam Albahkali Albahkali E. ,Abdulhakim Almajid Almajid A.

Materials 2022-11-01

Effect of the Matrix Melt Flow Index and Fillers on Mechanical Properties of Polypropylene-Based Composites

Jaimon Dennis Quadros Quadros J.D. ,Chetna Nagpal Nagpal C. ,Sher Afghan Khan Khan S.A. ,Abdul Aabid Aabid A. ,Muneer Baig Baig M.

PLoS ONE 2022-10-01

Investigation of suddenly expanded flows at subsonic Mach numbers using an artificial neural networks approach

Narendran Jagadeesan Jagadeesan N. ,Anthoniraj Selvaraj Selvaraj A. ,Santhosh Nagaraja Nagaraja S. ,Mohamed Abbas Abbas M. ,C. Ahamed Saleel Saleel C.A. ,Abdul Aabid Aabid A. ,Muneer Baig Baig M.

Materials 2022-10-01

Response Surface Methodology Based Optimization of Test Parameter in Glass Fiber Reinforced Polyamide 66 for Dry Sliding, Tribological Performance

Bisma Parveez Parveez B. ,Nur Ayuni Jamal Jamal N.A. ,Hazleen Anuar Anuar H. ,Yusilawati Ahmad Ahmad Y. ,Abdul Aabid Aabid A. ,Muneer Baig Baig M.

Materials 2022-08-01

Microstructure and Mechanical Properties of Metal Foams Fabricated via Melt Foaming and Powder Metallurgy Technique: A Review

Krishnamoorthy Ramalingam Ramalingam K. ,Elumalai Perumal Venkatesan Venkatesan E.P. ,Abdul Aabid Aabid A. ,Muneer Baig Baig M.

Sustainability (Switzerland) 2022-05-01

Assessment of CI Engine Performance and Exhaust Air Quality Outfitted with Real-Time Emulsion Fuel Injection System

Daniel C. Ribu Ribu D.C. , Rajesh Rajesh R. , Thirumalaikumarasamy Thirumalaikumarasamy D. ,Chidambaram Seshadri Ramachandran Ramachandran C.S. ,C. Ahamed Saleel Saleel C.A. ,Abdul Aabid Aabid A. ,Muneer Baig Baig M. , Saleh Saleh B.

Coatings 2022-04-01

Investigating the Water Jet Erosion Performance of HVOF-Sprayed WC-10Co Coatings on 35CrMo Steel Utilizing Design of Experiments

Kashish Kumar Kumar K. ,Alok Singh Singh A. ,Saboor Shaik Shaik S. ,C. Ahamed Saleel Saleel C.A. ,Abdul Aabid Aabid A. ,Muneer Baig Baig M.

Sustainability (Switzerland) 2022-03-01

Comparative Analysis on Dehumidification Performance of KCOOH–LiCl Hybrid Liquid Desiccant Air-Conditioning System: An Energy-Saving Approach

Jaimon D. Quadros Quadros J.D. , Suhas Suhas P. ,Sher A. Khan Khan S.A. ,Abdul Aabid Aabid A. ,Muneer Baig Baig M. ,Yakub I. Mogul Mogul Y.I.

Technical Sciences 2022-01-01

Fuzzy-based prediction for suddenly expanded axisymmetric nozzle flows with microjets

Shilpa Shilpa M.K. ,Md Abdul Raheman Raheman M.A. ,Abdul Aabid Aabid A. ,Muneer Baig Baig M. , Veeresha Veeresha R.K. ,Nagesh Kudva Kudva N.

Fluid Dynamics and Materials Processing 2022-01-01

A Systematic Review of Thermoelectric Peltier Devices: Applications and Limitations

Abdul Aabid Aabid A. ,Sher Afghan Khan Khan S.A. ,Muneer Baig Baig M.

Fluid Dynamics and Materials Processing 2022-01-01

Numerical Analysis of a Microjet-Based Method for Active Flow Control in Convergent-Divergent Nozzles with a Sudden Expansion Duct

Jalal Mohammed Zayan Zayan J.M. ,Abdul Khaliq Rasheed Rasheed A.K. ,Akbar John John A. ,Mohammad Khalid Khalid M. ,Ahmad Faris Ismail Ismail A.F. ,Abdul Aabid Aabid A. ,Muneer Baig Baig M.

Materials 2022-01-01

Investigation on rheological properties of water-based novel ternary hybrid nanofluids using experimental and taguchi method

Abdul Aabid Aabid A. ,Mohammed Ali Murtuza Murtuza M.A. ,Sher Afghan Khan Khan S.A. ,Muneer Baig Baig M.

Journal of Materials Research and Technology 2022-01-01

Optimization of dry sliding wear behavior of aluminium-based hybrid MMC's using experimental and DOE methods

Abdul Aabid Aabid A. ,Sher Afghan Khan Khan S.A. ,Asif Afzal Afzal A. ,Muneer Baig Baig M.

Meccanica 2022-01-01

Investigation of tiny jet locations effect in a sudden expansion duct for high-speed flows control using experimental and optimization methods

Asiful H. Seikh Seikh A.H. ,Muneer Baig Baig M. ,Ateekh Ur Rehman Rehman A.U. ,Faraz H. Hashmi Hashmi F.H. ,Jabair A. Mohammed Mohammed J.A.

Molecules 2021-12-01

Stress corrosion cracking behavior of fine-grained Al5083 alloys processed by equal-channel angular pressing (ECAP)

Tikendra Nath Verma Verma T.N. ,Upendra Rajak Rajak U. ,Abhishek Dasore Dasore A. ,Asif Afzal Afzal A. ,A. Muthu Manokar Manokar A.M. ,Abdul Aabid Aabid A. ,Muneer Baig Baig M.

Scientific Reports 2021-12-01

Experimental and empirical investigation of a CI engine fuelled with blends of diesel and roselle biodiesel

Jaimon Dennis Quadros Quadros J.D. ,Sher Afghan Khan Khan S.A. ,Abdul Aabid Aabid A. ,Mohammad Shohag Alam Alam M.S. ,Muneer Baig Baig M.

Aerospace 2021-11-01

Machine learning applications in modelling and analysis of base pressure in suddenly expanded flows

Muneer Baig Baig M. ,Asiful H. Seikh Seikh A.H. ,Ateekh Ur Rehman Rehman A.U. ,Jabair A. Mohammed Mohammed J.A. ,Faraz Hussain Hashmi Hashmi F.H. ,Sameh Mohamed Ragab Ragab S.M.

Crystals 2021-08-01

Microstructure evaluation study of Al5083 alloy using EBSD technique after processing with different ecap processes and temperatures

Abdul Aabid Aabid A. ,Sher Afghan Khan Khan S.A. ,Muneer Baig Baig M.

Applied Sciences (Switzerland) 2021-08-01

A critical review of supersonic flow control for high-speed applications

Muneer Baig Baig M. ,Ateekh Ur Rehman Rehman A.U. ,Jabair A. Mohammed Mohammed J.A. ,Asiful H. Seikh Seikh A.H.

Crystals 2021-06-01

Effect of microstructure and mechanical properties of al5083 alloy processed by ecap at room temperature and high temperature

Ballupete Nagaraju Sharath Sharath B.N. ,Channarayapattana Venkataramaiah Venkatesh Venkatesh C.V. ,Asif Afzal Afzal A. ,Navid Aslfattahi Aslfattahi N. ,Abdul Aabid Aabid A. ,Muneer Baig Baig M. ,Bahaa Saleh Saleh B.

Materials 2021-06-01

Multi ceramic particles inclusion in the aluminium matrix and wear characterization through experimental and response surface-artificial neural networks

Tanner David Harpool Harpool T.D. ,Ibrahim Mohammed Alarifi Alarifi I.M. ,Basheer A. Alshammari Alshammari B.A. ,Abdul Aabid Aabid A. ,Muneer Baig Baig M. ,Rizwan Ahmed Malik Malik R.A. ,Ahmed Mohamed Sayed Sayed A.M. ,Ramazan Asmatulu Asmat

Materials 2021-05-01

Evaluation of the infill design on the tensile response of 3d printed polylactic acid polymer

Khan Khan M.I. ,Nisar Fatima Fatima N. ,Ghulam M. Mustafa Mustafa G.M. ,Mudassar Sabir Sabir M. ,Samar A. Abubshait Abubshait S.A. ,Haya A. Abubshait Abubshait H.A. ,Thamraa Alshahrani Alshahrani T. ,Munawar Iqbal Iqbal M. ,Amel Laref Lare

International Journal of Energy Research 2021-05-01

Improved photovoltaic properties of dye sensitized solar cell by irradiations of Ni²⁺ ions on Ag-doped TiO2 photoanode

Harri Junaedi Junaedi H. ,Muneer Baig Baig M. ,Abdulsattar Dawood Dawood A. ,Essam Albahkali Albahkali E. ,Abdulhakim Almajid Almajid A.

Journal of Materials Research and Technology 2021-03-01

Modeling analysis of the tensile strength of polypropylene base Short Carbon Fiber reinforced composites

Thanikodi Sathish Sathish T. ,Abdul Razak R. Kaladgi Kaladgi A.R.R. , Mohanavel Mohanavel V. , Arul Arul K. ,Asif Afzal Afzal A. ,Abdul Aabid Aabid A. ,Muneer Baig Baig M. ,Bahaa Saleh Saleh B.

Materials 2021-01-01

Experimental investigation of the friction stir weldability of aa8006 with zirconia particle reinforcement and optimized process parameters

Hany Rizk AMMAR AMMAR H.R. ,Muneer BAIG BAIG M. ,Asiful Hossain SEIKH SEIKH A.H. ,Jabair Ali MOHAMMED MOHAMMED J.A.

Transactions of Nonferrous Metals Society of China (English Edition) 2021-01-01

Effect of alloying elements on thermal stability of nanocrystalline Al alloys

Harri Junaedi Junaedi H. ,Muneer Baig Baig M. ,Abdulsattar Dawood Dawood A. ,Essam Albahkali Albahkali E. ,Abdulhakim Almajid Almajid A.

Polymers 2020-12-01

Mechanical and physical properties of short carbon fiber and nanofiller-reinforced polypropylene hybrid nanocomposites

Asiful H. Seikh Seikh A.H. ,Muneer Baig Baig M. ,Ateekh Ur Rehman Rehman A.U.

Applied Sciences (Switzerland) 2020-11-01

Effect of severe plastic deformation, through equal-channel angular press processing, on the electrochemical behavior of al5083 alloy

Harri Junaedi Junaedi H. ,Essam Albahkali Albahkali E. ,Muneer Baig Baig M. ,Abdulsattar Dawood Dawood A. ,Abdulhakim Almajid Almajid A.

Advances in Polymer Technology 2020-01-01

Ductile to Brittle Transition of Short Carbon Fiber-Reinforced Polypropylene Composites

Asiful H. Seikh Seikh A.H. ,Biplab Baran Mandal Mandal B.B. ,Amit Sarkar Sarkar A. ,Muneer Baig Baig M. ,Nabeel Alharthi Alharthi N. ,Bandar Alzahrani Alzahrani B.

International Journal of Mechanical and Materials Engineering 2019-12-01

Application of response surface methodology for prediction and modeling of surface roughness in ball end milling of OFHC copper

Asiful H. Seikh Seikh A.H. ,Muneer Baig Baig M. ,Jitendra Kumar Singh Singh J.K. ,Jabair A. Mohammed Mohammed J.A. ,Monis Luqman Luqman M. ,Hany S. Abdo Abdo H.S. ,Amir Rahman Khan Khan A.R. ,Nabeel H. Alharthi Alharthi N.H.

Coatings 2019-10-01

Microstructural and corrosion characteristics of al-fe alloys produced by high-frequency induction-sintering process

Muneer BAIG BAIG M. ,Hany R. AMMAR AMMAR H.R. ,Asiful H. SEIKH SEIKH A.H. ,Jabair A. MOHAMMED MOHAMMED J.A. ,Fahad AL-MUFADI AL-MUFADI F. ,Abdulaziz ALABOODI ALABOODI A.

Transactions of Nonferrous Metals Society of China (English Edition) 2019-02-01

Thermal stability of nanocrystalline Al−10Fe−5Cr bulk alloy

Harri Junaedi Junaedi H. ,Essam Albahkali Albahkali E. ,Muneer Baig Baig M. ,Abdulhakim Almajid Almajid A.

AIP Conference Proceedings 2018-07-11

The effect compatibilizer on mechanical properties of short carbon fiber reinforced polypropylene composites

Asiful H. Seikh Seikh A.H. ,El-Sayed M. Sherif Sherif E.-S.M. ,Sohail M. A. Khan Mohammed Khan Mohammed S.M.A. ,Muneer Baig Baig M. ,Mohammad Asif Alam Alam M.A. ,Nabeel Alharthi Alharthi N.

PLoS ONE 2018-04-01

Microstructure characterization and corrosion resistance properties of Pb-Sb alloys for lead acid battery spine produced by different casting methods

Muneer Baig Baig M. ,Hany Rizk Ammar Ammar H.R. ,Asiful Hossain Seikh Seikh A.H. ,Mohammad Asif Alam Alam M.A. ,Nabeel H. Alharthi Alharthi N.H.

International Journal of Electrochemical Science 2017-04-01

Effect of immersion time and temperature on corrosion behaviour of nanocrystalline Al-Fe-Cr alloy

Asiful H. Seikh Seikh A.H. ,Hossam Halfa Halfa H. ,Muneer Baig Baig M. ,Sohail M. A. Khan Khan S.M.A.

Journal of Materials Engineering and Performance 2017-04-01

Microstructure Characterization and Corrosion Resistance Behavior of New Cobalt-Free Maraging Steel Produced Through ESR Techniques

Muneer Baig Baig M. ,Sohail M. A. Khan Khan S.M.A. ,Magdy M. El Rayes El Rayes M.M. ,Asiful Hossain Seikh Seikh A.H.

Materialpruefung/Materials Testing 2017-03-01

Evaluation of residual stresses present in spirally welded API grade pipeline steel using the hole drilling method

Muneer Baig Baig M. ,Ehab El-Danaf El-Danaf E. ,Jabair Ali Mohammed Mohammed J.A.

Journal of Materials Engineering and Performance 2016-12-01

A Study on the Synergistic Effect of ECAP and Aging Treatment on the Mechanical Properties of AA6082

Asiful Hossain Seikh Seikh A.H. ,Muneer Baig Baig M. ,Hany Rizk Ammar Ammar H.R. ,Mohammed Asif Alam Alam M.A.

Metals 2016-06-16

The influence of transition metals addition on the corrosion resistance of nanocrystalline al alloys produced by mechanical alloying

Muneer Baig Baig M. ,Asiful H. Seikh Seikh A.H. ,Hany Ammar Ammar H. ,Jabair A. Mohammad Mohammad J.A. ,Mohammad A. Alam Alam M.A.

Advances in Materials and Processing Technologies 2016-04-02

Effect of different compaction and sintering conditions on the thermo-mechanical properties of bulk aluminium produced using mechanical alloying

Muneer Baig Baig M. ,Hany Rizk Ammar Ammar H.R. ,Asiful Hossain Seikh Seikh A.H.

A 2016-02-08

Thermo-mechanical responses of nanocrystalline Al-Fe alloy processed using mechanical alloying and high frequency heat induction sintering

Ehab El-Danafa El-Danafa E. ,Muneer Baig Baig M.

Light Metals 2016 2016-02-07

Quasi and Dynamic Compression of ECAP rocessed AA 6082

Ehab Adel El Danaf El Danaf E.A. ,Muneer Baig Baig M.

TMS Light Metals 2016-01-01

Quasi and dynamic compression of ECAP processed AA 6082

Muneer Baig Baig M. ,Akhtar S. Khan Khan A.S. ,Shi-Hoon Choi Choi S.-H. , Lee Lee E.

Journal of Dynamic Behavior of Materials 2015-09-01

Effect of Manufacturing Processes and Welding Type on Quasi-static and Dynamic Responses of Aluminum Alloys: Experiments and Modeling

Muneer Baig Baig M. ,Ehab El-Danaf El-Danaf E. ,Mahmoud Soliman Soliman M. ,Abdulhakim Almajid Almajid A. ,Waleed Alshalfan Alshalfan W. ,Khaled Alhajeri Alhajeri K.

Materialpruefung/Materials Testing 2015-01-01

Mechanical properties, microstructure and toughness assessment of a X70 pipeline steel

Asiful Hossain Seikh Seikh A.H. ,Muneer Baig Baig M. ,Hany Rizk Ammar Ammar H.R.

International Journal of Electrochemical Science 2015-01-01

Corrosion behavior of nanostructure al-fe alloy processed by mechanical alloying and high frequency induction heat sintering

Ehab A. El-Danaf El-Danaf E.A. ,Muneer Baig Baig M. ,Abdulhakim A. Almajid Almajid A.A. ,Mahmoud S. Soliman Soliman M.S.

Materials Science and Engineering 2014-01-01

The fracture strength of cryomilled 99.7 Al nanopowders consolidated by high frequency induction sintering

Ehab El-Danaf El-Danaf E. ,Megumi Kawasaki Kawasaki M. ,Magdy El-Rayes El-Rayes M. ,Muneer Baig Baig M. ,Jabair Ali Mohammed Mohammed J.A. ,Terence G. Langdon Langdon T.G.

Journal of Materials Science 2014-01-01

Mechanical properties and microstructure evolution in an aluminum 6082 alloy processed by high-pressure torsion

Muneer Baig Baig M. ,Ehab El-Danaf El-Danaf E. ,Jabair Ali Mohammad Mohammad J.A.

Materials and Design 2014-01-01

Thermo-mechanical responses of an aluminum alloy processed by equal channel angular pressing

Ehab A. El-Danaf El-Danaf E.A. ,Muneer Baig Baig M.

A 2013-03-10

High temperature deformation characteristics of equal channel angular pressed AA6082-T6

Ehab El-Danaf El-Danaf E. ,Muneer Baig Baig M. ,Abdulhakim Almajid Almajid A. ,Waleed Alshalfan Alshalfan W. ,Marawan Al-Mojil Al-Mojil M. ,Saeed Al-Shahrani Al-Shahrani S.

Materials and Design 2013-01-01

Mechanical, microstructure and texture characterization of API X65 steel

Muneer Baig Baig M. ,Akhtar S. Khan Khan A.S. ,Shi-Hoon Choi Choi S.-H. ,Aran Jeong Jeong A.

International Journal of Plasticity 2013-01-01

Shear and multiaxial responses of oxygen free high conductivity (OFHC) copper over wide range of strain-rates and temperatures and constitutive modeling

Akhtar S. Khan Khan A.S. ,Muneer Baig Baig M. ,Shi-Hoon Choi Choi S.-H. ,Hoe-Seok Yang Yang H.-S. ,Xin Sun Sun X.

International Journal of Plasticity 2012-01-01

Quasi-static and dynamic responses of advanced high strength steels: Experiments and modeling

Akhtar S. Khan Khan A.S. ,Muneer Baig Baig M.

International Journal of Plasticity 2011-04-01

Anisotropic responses, constitutive modeling and the effects of strain-rate and temperature on the formability of an aluminum alloy

Akhtar S. Khan Khan A.S. ,Muneer Baig Baig M. ,Syed Hamid Hamid S. ,Hao Zhang Zhang H.

International Journal of Solids and Structures 2010-10-01

Thermo-mechanical large deformation responses of Hydrogenated Nitrile Butadiene Rubber (HNBR): Experimental results

Khan Khan A.S. , Kazmi Kazmi R. , Baig Baig M. , Pandey Pandey A. , Farrokh Farrokh B.

9th International Conference on Technology of Plasticity, ICTP 2008 2008-01-01

Comprehensive responses of FCC, BCC & HCP metals including nanomaterials, and constitutive modeling